Release Note
=============================================================
=============================================================
BVEN3S00.v01
 
1. Bring up Code base
2. SPI configuration for EM100
3. Disable CRB_EC_SUPPORT
4. Base on TigerLake_IOTG_CR04_20201215_ms1
=============================================================
BVEN3S00.v02
 
1. Com1/Com2 work
2. USB work
3. Sata1/Sata2 work
4. Nvme SSD work
5. restart issue solved
6. 2 sets of E-KEY works
7. LAN1/LAN works after CLKRUN enabled, only I219 support UEFI PXE
8. Fix PTN3460 init code
9. Move conout before conin
10.OS successfully install and boot when 8882/EC disable
11.Base on TigerLake_IOTG_CR04_20201218
=============================================================
BVEN3S00.v03 2021/1/19
 
1. Volume OSD key work
2. Remove yellow band in Device manager
=============================================================
BVEN3S00.v07 2021/1/29
 
1. S3/S4/S5/Restart work normal in OS
2. Disable LPM S0 idle capability in Setup to solve S3 can't sleep issue
=============================================================
BVEN3S00.v08 2021/2/3
 
1. Cursor garbage in left top corner removed
2. Set mode 800*600 in Shell
=============================================================
BVEN3S00.v11 2021/3/29
 
1. Change SMBIOS data type to static
=============================================================
BVEN3S00.v12 2021/4/6
 
1. Fix USB 3.0 port has no beep when USB2.0 device plug-in.
=============================================================
BVEN3S00.v13 2021/4/20
 
1. Fix USB 3.0 port, system hang when USB3.0 dongle plug into USB3.0 port
=============================================================
BVEN3S00.v14 2021/7/15
 
1. Fix UUID issue, UUID error when WIFI card is not present, it cause pci bus shifting
=============================================================
BVEN3S00.v17 2021/7/23
 
1. Modify GOP settings, HDMI Max data rate to 1.65Gbps, Level-5
2. No memory install error beep : 4
3. Unlock Sideband Acess
4. Support ALC888 codec
=============================================================
BVEN3S00.v18 2021/8/2
 
1. Modify USB settings in TXE, fix USB 3.0 device in USB3.0 port will cause system restart failure. 
=============================================================
BVEN3S00.v20 2021/10/7
 
1. Add USB 3.0 workaround to avoid system hang up while power state transition in restart/S4/shutdown
2. Add dTPM device support
3. Add AC power lost feature
=============================================================
BVEN3S00.v21 2021/10/20
 
1. Disable PTT initial power-up state in TXT to avoid dTPM missing
2. Change UUID generation form I211 to I219
=============================================================
BVEN3S00.v22 2021/11/22
 
1. Enable Fastboot
2. Fine tuning backlight lower bound to 0x21 and make bright control with normal distribution 
3. Add workaround to no memory beep issue
4. Change I211 PXE ROM to E9706X3
5. Remove CSM item in Advanced page
6. Pull low GPIO GPP_D0 to D3 to disable Alert LED
=============================================================
BVEN3S00.v23 2022/02/18
 
1. Disable Fastboot
2. Modify DC output help info string
3. Change the method of Volume key function
4. Fix Com2 Io decode 0x2f8
=============================================================
BVEN3S00.v24 2022/03/28
 
1. Roll back GC_MODE solution to fix PXE-MDS no prompt issue
2. Change VR method in ME setting
=============================================================
BVEN3S00.v25 2023/10/18
 
1. Change HD Audio voltage select to 3.3V in GPIO settings in ME
2. Adding control item of PXE boot to SETUP layout
3. Change Battery info in OnyxEC.asl
=============================================================
BVEN3S00.v26 2024/01/10

● Support "IT8883" Alternate and keep the previous setting for IRQ
=============================================================
BVEN3S00.v27 2024/06/24

● Show basic info/options (CPU/MEM/SSD/TPM/...)
● Disabling SDD not working
=============================================================
BVEN3S00.v28 2024/08/16

● The system is gonna crash when plug in the USB3.0 Flash Drive with USB3.0 port and restart/shutdown/S4 after enter OS
=============================================================
BVEN3S00.v29 2024/09/23

● The GPU Utilization is heavy loading(60~80%) when run customer's AP(EC Sense)
● The Device Management has yellow mark when plug in "USB HUB+USB Disk" with the rear USB3.0 port
● The rear USB disk cannot be detected when plug in "front USB disk+rear USB disk" at the same time 
=============================================================

